CARE AND MAINTENANCE
SPECIFICATIONS
Occasional
care and maintenance
of the unit is needed to
optimize the performance of your unit.
To clean the cabinet
Use a soft dry cloth.
If the surfaces are extremely dirty, use a soft cloth lightly
moistened with mild detergent solution. Do not use strong
solvents, such as alcohol, benzine or thinner as these could
damage the finish of the unit.
FM
tuner section
Tuning range
87.5 Mt+z to 108 MHz
Usable sensitivity
13.2 dBf
(IHF)
Antenna terminals
75 ohms (unbalanced)
AM tuner section
Tuning range
530 kHz to 1710 kHz (10 kHz step),
531 kHz to 1602 kHz (9 kHz step)
Usable sensitivity
350 pVlm
Antenna
Loop antenna
Amplifier section
Power output
[Stereo Mode]
Front
125 watts per channel, Min. RMS at 4
or 8 ohms, from 40 Hz to 20 kHz, with
no more than 0.8% Total Harmonic
Distortion
[Dolby Pro Logic Mode]
Front
120 waitts per channel, Min. RMS at 4
or 8 ohms (selectable), from 40 Hz to
20 kHz, with no more than 0.97. Total
Harmonic Distortion
Rear (Surround)
60 watts per channel, Min. RMS at 8
ohms, 1 kHz, with no more than 0.90/0
Total Harmonic Distortion
Center
120 watts, Min. RMS at 4 or 8 ohms
(selectable), 1 kHz, with no more than
0.9% Total Harmonic Distortion
Total harmonic
0.07 % (105 W, 1 kHz, 8 ohms, Front)
distortion
Inputs
AUDIO IN
f> HONO: 2.8 mV (50 kohms)
CD: 370 mV (50 kohms)
TAF'E MONITOR: 200 mV (25
kohms)
\/lDEO 1, VIDEO 2/LD/MD,
VIDEO 3, AUWTV 370 mV (50
kohms)
VIDE;O IN: 1 Vp-p (75 ohms)
AUDIO OUT (REC OUT): 230 mV (2
kohrns)
VIDEO OUT (MONITOR): 1 Vp-p (75
ohms)
SUPER WOOFER: 3.1 V
FRONT SPEAKERS IMP: 8Q/4Q
selectable (front speakers A and B):
With the SPEAKER IMPEDANCE
SELECTOR set to 4Q, accepts
speakers of 4 ohms.
With the SPEAKER IMPEDANCE
SELECTOR set to 8f2, accepts
speakers of 8 ohms or more.
SURRCWND SPEAKERS IMP: 8Q
(surround speakers): accepts
speakers of 8 ohms or more
outputs
ENGLISH
16