Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTING THE SUPPLIED ANTENNAS @
Connect the FM antenna to the FM 75 Q terminals and the AM
antenna to the AM LOOP terminals.
FM antenna
antenna
To stand the AM loop antenna on a surface
Fix the claw to the slot as shown in the illustration.
To position the antennas
FM feeder antenna:
Extend this antenna horizontally in a T shape and fix its ends to
the wall.
AM loop antenna:
Position for the best reception.
m
Do not bring the FM antenna near metal objects or curtain rails.
Do not bring the AM antenna near other external equipment,
the unit itself, the AC power cord or speaker cords, as noise
will be picked up.
Do not unwind the AM loop antenna wire.
CONNECTING
AN OUTDOOR ANTENNA
For better
FM reception,
use of an outdoor
antenna
is
recommended. Connect the outdoor antenna to the FM 75 Q
terminals.
ABOUT THE REMOTE CONTROL
Inserting batteries
Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.
R6(AA)
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries
with new ones.
Using the remote control
The instructions in this manual refer mainly to the buttons on the
main unit. Buttons on the remote control with the same names
as those on the main unit can be used as well.
m
If the unit is not going to be used for an extended period of
time, remove the batteries to prevent possible electrolyte
leakage.
The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor in the display window is exposed to intense light, such
as direct sunlight.
- Other remote controls are used nearby (those of television,
etc. )
Remote control operation
This remote control system allows you to operate other external
equipment besides the AIWA receiver. For details of the remote
control operation for other external equipment, see "REMOTE
CONTROL" on page 14.
Hereupon, it is explained how to operate the Aiwa receiver.
1
2
RECEIVER
AlWA
KEY
RECEIVER
MUTE
POWER
TUNER
PRESET
FUNCTION
VOLUME
Press the AIWA RECEIVER
button to set
remote control to the Aiwa receiver mode.
Press one of the buttons indicated above.
the
5
ENGLISH
Publicidad
