Aiwa AV-X220 Manual De Instrucciones página 8

CUSTOM AUDIO ADJUSTMENT
MUTl~G V?LUME
BALANCE
T-BASS BBE
VOLUME CONTROL
Turn the VOLUME control on the unit, or press the VOLUME
buttons on the remote control.
To adjust the Iefth'ight balance
Turn the BALANCE control.
To mute
the
sound temporarily
Press the MUTING button.
"MUTE ON" appears on the display for four seconds. While
muting the sound, the selected FUNCTION button flashes. Press
the MUTING button again to restore the sound.
BBE SYSTEM
The BBE system enhances the clarity of high-frequency sound.
Press the BBE button.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of low-frequency
sound.
Press the T-BASS button.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
L
111111
iibdk+mm+=
J
(cancel)
m
Low-frequency sound may be distorted when the T-BASS system
is used for a disc or tape in which low-frequency sound is
originally emphasized. In this case, cancel the T-BASS system.
SOUND ADJUSTMENT DURING
RECORDING
The output volume and tone (except BBE) of the speakers or
headphones may be freely varied without affecting the level of
the recording.
Recording with the BBE
The desired source can be recorded with the BBE function to
enhance the clarity of high-frequency sound. When playing back
a tape recorded with BBE, it is recommended that BBE be set to
off.
m
The BBE system is automatically canceled when Dolby Pro Logic
is turned on.
7
ENGLISH