Hitachi Koki DH 25PA Instrucciones De Manejo página 8

English
3. Large hole boring (Rotation + Striking)
Center pin, core bit, core bit shank and guide plate.
(Guide plate) Center pin
Center pin
–
Center pin (A)
Center pin (B)
Do not use core bits with
outer diameter of 25 mm
and 29 mm.
4. Bolt placing operation with Chemical Anchor. (Rotation + Striking)
Standard socket
(
on the market
5. Drilling holes (Rotation only) (DH25PB only)
Drill chuck (13VLA)
Chuck wrench
13 mm drill chuck ass'y (includes chuck wrench) and chuck (for drilling in steel or wood).
7
Core bit
Core bit (outer diameter)
(A)
(B)
with guide plate
(The guide plate is not equipped with core bits
with outer diameters of 25 mm and 29 mm.)
(SDS-plus shank)
)
12.7 mm Chemical Anchor Adapter
19 mm Chemical Anchor Adapter
Chuck adapter (D)
(SDS-plus shank)
Core bit shank
(SDS-plus shank)
25 mm
29 mm
32 mm
35 mm
38 mm
45 mm
50 mm
65 mm
80 mm
90 mm
Core bit shank
Core bit shank (A)
Core bit shank (B)