Publicidad
Idiomas disponibles
Idiomas disponibles
U S E R M A N U A L
TECHNICAL DATA
Parameter description
Parameter value
UPDATED BEESWAX
Product name
SHEET MACHINE
Model
WIE-CM-02
Dimensions of the
sheet machine when
220x20x440
folded (Width / Depth/
Height) [ mm]
Dimensions of the
sheet machine when
440x10x440
unfolded (Width/
Depth / Height) [ mm]
Dimensions of the die
5,3
cell [mm]
Weight [kg]
4,28
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
and
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To ensure long and reliable operation of the product,
operate and maintain it correctly and strictly in compliance
with this manual. The technical data and specifications in
this manual are up-to-date. The manufacturer reserves
the right to modifications for the purpose of quality
improvement. Considering the technological progress and
the feasibility of noise reduction, the product is designed
and built so that risks resulting from noise emissions are
minimised as far as possible.
LEGEND
Read instructions before use.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation
(general warning sign).
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or death.
The term "appliance" or "product" in the warnings and
instructions refers to the UPDATED BEESWAX SHEET
MACHINE.
EN
2.1. WORKPLACE SAFETY
a)
Keep the workplace tidy and well lit. Disorder or poor
lighting can lead to accidents. Be careful, watch what
you are doing and use common sense when working
with the machine.
b)
If in doubt as to whether the product is working
properly or found to be damaged, contact the
manufacturer's technical service.
c)
Only the manufacturer's technical service may repair
the product. Do not attempt to repair the product on
your own!
d)
No children or unauthorised individuals shall be
allowed at the workplace.
e)
Use the appliance in a well-ventilated room.
f)
Keep this manual for future reference. If the product
is to be handed over to a third party, hand it over with
this user manual.
g)
Keep packaging components and small installation
parts out of the reach of children.
h)
Keep the machine away from children and animals.
i)
When operating this machine together with other
machines, follow each of their user manuals.
REMEMBER! Keep children and other bystanders
safe while operating the device.
2.2. PERSONAL SAFETY
a)
Do not operate the product if you are tired, ill or under
the influence of alcohol, drugs or medication which
might significantly impair your ability to operate the
product.
b)
The product is not intended to be used by individuals
(including children) with reduced mental, sensory
or intellectual capacity or lack of experience and/
or knowledge, unless they are supervised by an
individual responsible for their safety or have been
given instructions by the responsible individual on
how to operate the product.
c)
The appliance may only be operated by individuals
who are physically fit, capable of handling the
appliance and who have been adequately trained,
have read this manual and have received training in
health and safety.
d)
Do not wear loose clothing or jewellery. Keep hair,
clothing and gloves away from moving parts. Loose
clothing, jewellery or long hair can be caught by
moving parts.
e)
The machine is not a toy. Children must be supervised
to ensure that they do not play with it.
f)
Do not put your hands or objects inside the appliance
in operation!
2.3. SAFE USE OF THE PRODUCT
a)
Keep unused machines out of the reach of children
and anyone unfamiliar with the machine or this
manual. Machines are dangerous when used by
inexperienced users.
b)
Keep the product in good working order. Before each
use, check for generally evident damage and damage
to any of the moving parts (inspect for cracks in parts
and components or any other condition that may
affect the safe operation of the product). If damaged,
have the product repaired before use.
6
c)
Keep the product out of the reach of children.
d)
The product shall be repaired and maintained by
qualified personnel using original spare parts only.
This will ensure safe operation of the product.
e)
To ensure the designed operational integrity of the
product, do not remove the factory-installed covers
or loosen any bolts.
f)
Do not move, handle or turn the machine in operation.
g)
Clean the machine regularly to prevent permanent
deposits of dirt.
h)
The machine is not a toy. Cleaning and maintenance
shall not be performed by children without adult
supervision.
i)
Never attempt to tamper with the product to change
its parameters or structure.
j)
Keep the machine away from sources of fire and heat.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The appliance is intended for the production of wax sheets.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
1
1.
Sheet machine
2.
Internal die
3.2. PREPARATIONS FOR OPERATION
POSITIONING THE MACHINE
Position the machine where good air circulation is ensured.
Maintain a minimum clearance of 10 cm from all sides
of the appliance. Keep the appliance away from any hot
surfaces. Always operate the appliance on a level, firm,
clean, fireproof, and dry surface and out of the reach of
children and individuals with reduced mental, sensory and
intellectual capacities.
BEFORE INITIAL USE
CAUTION: It takes 48 hours for the machine to be properly
prepared for the process of producing wax sheets. It is not
necessary to pre-soak the machine before each use. The
purpose of presoaking is to extend the life of the machine.
EN
1.
Immerse the machine in cold water, then open it so
that the die surfaces are completely covered with
water.
2.
Leave the appliance in cold water for 48 hours.
3.
After that time, take it out. Rinse the upper and lower
dies with water and soap (2-3 times) using a clean
cloth.
4.
Thoroughly dry the entire appliance.
5.
The machine is now ready for the production of wax
sheets.
3.3. OPERATING THE MACHINE
b
a
c
c
1
2
3
Before starting work with the appliance, prepare the
equipment necessary for the process, including an additional
tank with cold water.
1.
To prevent wax from sticking to the frame (3) of the
appliance, coat it with a thin layer of cooking oil.
2.
Apply an appropriate amount of beeswax to the lower
die (2). Start at the inner edge (a), gradually moving
towards the outer edge.
3.
Close the machine (b) carefully to prevent air bubbles
2
from forming on the surface of the product.
4.
Press the edges of the machine (c) and hold for about
10 seconds. Excess beeswax will come out of the dies.
5.
Control the pressure on the machine so as not to
damage the product.
6.
Turn the press upside down and place it in an
external tank with water to cool the product faster.
The cooling time in water varies depending on the
season and the environmental conditions around the
appliance. Adjust the cooling time accordingly.
7.
Open the machine. Clean the frame of the appliance
of any excess beeswax.
8.
Gently remove the wax sheets.
9.
CAUTION: If the wax sheet breaks through or falls
apart after opening the machine, the product has not
been cooled properly.
10.
The temperature of the machine is important for the
correct process of producing the wax sheets and
should be lower than the perceived temperature.
This significantly affects the cooling process of the
sheet. Too high a machine temperature inadequately
removes heat from the melted beeswax.
11.
Before proceeding with the next process, place your
hand on the lower die after removing the sheet and
hold for about 10 seconds.
12.
Verify the temperature of the machine and adjust the
cooling time of the product.
7
Publicidad
