Publicidad
Idiomas disponibles
Idiomas disponibles
FR
Switching on/off : illustration 3.1 and 3.10
Starting:
→ Open the water inlet valve and plug the machine.
ES
→ To switch the machine on, set the On/Off, switch to ON.
→ Press the safety button on the spray gun, and press the trigger until there is a steady
stream of water.
Stopping:
PT
→ Release the trigger.
→ To switch the machine off, set the On/Off, switch to OFF.
→ Close the water inlet valve and verify there are no more water on the spray gun.
IT
→ Unplug the machine.
EL
PL
RU
5 in 1 nozzle : illustration 3.5
This nozzle as 5 positions to help you clean perfectly :
→ High pressure 0 : very precise use
KZ
→ High pressure 25 : large surfaces
→ High pressure 40 : very large surfaces
→ Rotary : precise use
UA
→ Foamer : use with detergent
To change from one another, you have to turn the nozzle to the corresponding pictogram. Use
one hand on each side of the rotation part as shown on the illustration.
RO
Use for cleaning : illustration 3.6 to 3.9
EN
Use special care when cleaning tyres. Vehicle tyres/tyre valves may become damaged or burst
when handled improperly. First signs of damage included discolorations on the tyre.
Damaged vehicle tyres/tyre valves pose a life-threatening risk. Keep the jet at a distance of at
least 30 cm!
WARNING ! RISK OF MACHINE DAMAGE !
NEVER OPERATE THE MACHINE WITHOUT WATER INLET AS DRY
RUNNING MAY DAMAGE THE PUMP. USE A WATER FILTER IF THE
INLET WATER IS CONTAMINATED.
DANGER !
RISK OF FATAL INJURY !
206
Publicidad
