cecotec WANDERLUSTMIX USB Manual De Instrucciones página 38

ENGLISH
5. CLEANING AND MAINTENANCE
1. Detach the cup from the base.
2. Rinse the cup and the lid with water. Use a cloth to clean the blender body.
Note
Prevent water from entering the button and the USB charging port.
6. TROUBLESHOOTING
No. Problem
1 After installation, the blender
does not work and the red
indicator light flashes
2 The blender does not work
and the red indicator light
lights up for 5 seconds
3 The blender stops
automatically when in
operation
4 The red and white indicator
lights flash alternately for 10
seconds
5 Liquid spillage
6 Smoke
38 BATIDORA DE VASO INDIVIDUAL USB / USB SINGLE-SERVE JUG BLENDER
Cause
The cup or the cup's lid are
not fixed properly.
Not enough battery or about
to run out.
There is not enough food,
or the blender has stopped
automatically after 45
seconds of operation.
The motor is blocked.
The silicone gasket is not
properly fitted.
Due to continued use.
Protection against
overheating system is
activated.
Solution
Screw the cup into
the base by turning
it clockwise.
Charge the battery.
Add ingredients
above the blade
and switch the
blender back on.
Remove the food
blocking the blades
and switch on the
blender again.
Install the gasket
correctly to prevent
fluid spillage.
Let the blender
stand for 30 to 60
minutes before
using it again.