Publicidad
Quad 500 Face Shield
Assembly, Operating, and Maintenance Instructions
Window Assembly
1.
Insert the top corner of the window on to the crown tab located in the image below, repeat for the
other side. Be cautious not to apply excess force that may break the corner tabs of the window.
2.
Press release tab on the inside of the crown while pushing the bottom of the window towards the crown.
3.
Using both hands, pull the side frame of the face shield to secure the window inside the side tabs.
Repeat for the other side of the window. The window must be secured by the (3) face shield frame inner
tabs on both sides per image (4).
4.
Carefully pull the face shield chin guard using both hands to secure the window to the bottom (2) chin
guard tabs. Verify the bottom of the window is properly secured between the chin guard tabs as per
image (6).
5.
NOTE: Before using make sure the Locking Tabs identified in the image are fully engaged!
4
PULL
PULL
1
Insert the top corner of
the window in-to the
crown tab.
3
PULL
PULL
2
Press release tab to secure
the window to the crown.
Push window
towards crown
5
30
Locking
tabs
Window
Publicidad
