Using The Memory Function - Walgreens PREMIUM ARM Manual De Instrucciones

USING THE MEMORY FUNCTION

This monitor can be used by 2 users. Each user can store up to 120
measurements.
This monitor features an advanced memory mode to provide you with
a variety of options for reviewing your measurement history, including
AM/PM Averaging. Reviewing your morning (AM) and nighttime (PM)
measurements can provide important information about how your
blood pressure changes throughout the day.
Displays average of last three readings.
Displays average of last 3 morning
readings.
(AM is defined as 4:00 AM – 12:00 PM).
Displays average of last 3 nighttime
readings.
(PM is defined as 6:00 PM – 2:00 AM).
Indicates reading is an average of a Triple-
Check measurement. Press the + button to
review individual readings that make up the
Triple-Check average.
Note:
A Triple-Check average and the 3 measurements that make this
average, count as 4 readings when stored in memory.
31
To use the memory function:
1. Press the USER-SELECT button to select User 1 or User 2.
M
2. Press the M button to access memory.
3. The monitor will first display the calculated average applied
to the last 3 memories.
Note:
• If the last 3 readings was a Triple-Check average, then the Triple-
Check average will be displayed.
• Memory averaging function will only average individual readings.
• Every new press of the M button will recall a previous reading. The
latest reading will be recalled first.
Note:
While reviewing the readings, the Triple-Check Average icon may
appear on the screen. Press the + button to review individual readings
that make up the Triple Check average.
or
M
press the
+ button
32