(phonebook)*
Select a contact from the name list/number
list in the phonebook. To search for the
desired contact in alphabetical order from
the name list, touch
(phone number input)
Enter the phone number.
Preset phone number list
Select the stored contact.
To store the contact, see "Presetting phone
numbers" (page 14).
* The cellular phone needs to support PBAP (Phone
Book Access Profile).
3
Touch
.
The phone call starts.
Presetting phone numbers
You can store up to 6 contacts in the preset list.
1
In the phone screen, select a phone number
that you want to store in the preset dial
from the phonebook.
The confirmation display appears.
2
Touch [Add to Preset].
3
Select the preset phone number list where
the phone number is stored.
The contact is stored in the preset phone
number list.
14
GB
.
Available Operations During a
Call
To adjust the ringtone volume
Press VOL +/– while receiving a call.
To adjust the talker's voice volume
Press VOL +/– during a call.
To adjust the volume for the other party (Mic
gain adjustment)
During a handsfree call, touch
[MIC Gain] to [High], [Middle], or [Low].
To reduce echo and noise (Echo/noise
canceler mode)
During a call, touch
[Mode 1] or [Mode 2].
To switch between handsfree mode and
handheld mode
During a call, touch
phone call audio between the unit and cellular
phone.
Note
Depending on the cellular phone, this operation may not be
available.
To answer an incoming call automatically
Touch
, then set [Auto Answer] to [ON].
, then set
, then set [Speech Quality] to
to switch the