Publicidad
Idiomas disponibles
Idiomas disponibles
Before Electrical connection : Check the Installation
Environment and Position
When choosing the position of installation, comply with the following conditions:
To avoid unwanted power derating due to an increase in the internal
temperature of the inverter, do not expose it to direct sunlight.
To avoid overheating, always make sure the flow of air around the
inverter is not blocked.
Do not install in places where gasses or flammable substances may be
present.
Avoid electromagnetic interference that can compromise the correct
operation of electronic equipment.
It's recommended to install microinverter on structures underneath the
photovoltaic modules so that they work in the shade.
Use a mobile phone to check the Wi-Fi signal strength at the installation
position. If the Wi-Fi signal is bad, try to install the microinverter at
another position or move the Wi-Fi router.
DANGER
·Before installation, check the micro-inverter to ensure absence of any
transport or handling damage, which could affect insulation integrity or safety
clearances.
·Unauthorized removal of necessary protections, improper use, incorrect
installation and operation may lead to serious safety and shock hazards or
equipment damage.
·Be aware that installation of this equipment includes risk of electric shock.
Publicidad
