Sirius SI-1KIT410 Manual Del Usuario página 50

Step 3. Start the System
Connect the AC cable plug to the 230V house socket.
Your system
producing power after about a
two-minute wait time.
The definition of LED light signals is shown as below :
Status
Flashing Green (0.2-0.8)
Flashing Green (0.2-
3.8)
Flashing Red
Solid Red
will start
If your micro-inverter is clicking in
green color – the connection is well
done and the production of electricity
already started!
Indicates
Working normally
WiFi abnormally
Working abnormally
Fault
The LED will flash green and red
at start up.
Solutions
Your installation
generates electricity
Verify the wifi connection
Verify the electrical
connections
Refer to troubleshooting
section below