End of operation
• Switch the machine off (ON/OFF switch) and pull the power
supply cord out of the mains socket.
Cleaning the machine
Attention:
Never clean the machine with a high-pres-
sure cleaner or water jet.
Water ingress in the machine may cause
considerable damage to the mechanical or
electrical parts.
• Wipe the machine with a moist cloth.
Storing / parking the machine (not in operation)
• Wind up the main cord loosely.
Notice:
Never store the machine when it is still wet
from cleaning. Always allow it to dry out
before re-assembling.
This will prevent the formation of mold and
unpleasant odors.
Service, maintenance and care
The maintenance of the machine is a prerequisite for impec-
cable operation and a long service life.
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex-
pire.
Legend:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity
Cleaning the tool
Cleaning / replacing the coarse filter
Cleaning / replacing the filter cloth
Cleaning the overfill protection (indica-
tion for full recovery tank) (Ensure that
the float is not stuck and can easily
move up and down)
Clean the machine with a moist cloth
54
Service intervals
TASKI machines are high-quality machines that have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
• In order to maintain operational safety and readiness for
use, the machine must be serviced after 500 working hours
or at least once a year.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal-
functions.
The required data are provided on the nameplate of your ma-
chine. The address of your closest TASKI service partner is
provided on the last page of these instructions of use.
●
●
●
●
●
Notice:
In case of extraordinary use and/or insuffi-
cient maintenance, shorter intervals are
required.