Kenmore 110.81422 Manual De Uso Y Cuidado E Instrucciones De Instalación página 5

iNSTALLATiON iNSTRUCTiONS
TOOLS AND PARTS
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Tools needed:
#2 Phillips and fiat-
blade screwdriver
Adjustable wrench that
opens to 1" (25 mm) or
9/16" open-end wrench
(for adjusting dryer feet)
Wire stripper (direct wire
installations)
Tin snips (for new vent Caulking gun and Level Knife
installations) compound (for instaliing
new exhaust vent)
Vent clamps
Pliers Wood block
(for leveling)
1/4" (6 mm) nut
driver or socket wrench
(recommended)
Ruler or measuring tape
Parts supplled:
Remove parts package from the washer basket. Check that all parts were included.
Rear leveling legs (2) Front leveling legs (2) Removable tie strap
Drain hose
Silver, double-wire hose clamp
Parts needed: (Not supplied)
Check local codes, electrical supply, and venting, and read "Electrical Requirements" and "Venting
Requirements" before purchasing parts.
Mobile home installations require metal exhaust system hardware available for purchase from your
local Sears store or Sears Service Center. For further information, please call 1-800-4-MY-HOMi:®
(1-800-469-4663).
Inlet hoses with flat washers