Descargar Imprimir esta página

JENN-AIR JGC8430 Guia Del Usuario página 6

Ocultar thumbs Ver también para JGC8430:

Publicidad

Idiomas disponibles

Idiomas disponibles

C )N Fo
MODEL JGC8430
12
34
1. Left rear surface burner (10,500 BTUs),
2. Left front surface burner (6,500 BTUs
on Hi, 850 BTUs on Lo).
3. Right front surface burner (12,000
BTUs).
4. Right rear surfaceburner (9,100 BTUs).
MODEL
]GC8645
12
3
4
56
SEALED BURNERS
The sealed burners of your cooktop are
secured to the cooktop and are not de-
signed to be removed.
Since the burners
are sealed into the cooktop, boilovers or
spills will not seep underneath the cooktop.
However,
the burner
heads should be
cleaned after each use. The head portion of
the burner is easily removed for cleaning.
(See page 6 for cleaning directions.}
HIGH
PERFORMANCE
BURNER (12,000 BT J ;
There is one high speed burner on your
cooktop, located in the right front position.
This burner offers higher speed cooking
that can be usedto quickly bring water to a
boil and for large-quantity cooking.
SIJV_JV_ER BURNER
1t%0
/
This burner is located in the left front
position (JGC8430) or in the center posi-
tions (JGC8645). The simmer burner offers
a lower BTU flame for ddicata sauces or
melting chocolate.
* BTU ratingswill varywhen usingLPgas.
The grates must be properly positioned
before cooking.
Improper installation of
the grates may result in chipping of the
cooktop.
Do not operate
the burners
without
a
pan on the grate.
The grate's
porce-
lain finish may chip without
a pan to
absorb
the
heat
from
the
burner
flame.
Akhough the burner grates are duraNe,
they will gradually lose their shine and/or
discolor, due to the high temperatures
of
the gas flame.
1. Leftrear surface burner (10,500 BTUs),
2. Left front surface burner (9,100 BTUs),
3. Center rear surfaceburner (6,500BTUs
on Hi, 850 BTUs on Lo),
4. Center
front
surface
burner
(6,500 BTUs on Hi, 850 BTUs on Lo).
S. Right front surface burner (12,000
BTUs).
6. Right rear surfaceburner (9,100 BTUs).
To prevent the cooktop from discol-
oring or staining:
Clean cool<top after each use.
Wipe acidic or sugary spills as soon
as the cooktop has cooled as these
spills may discolor the porcelain.
natural gas, the flame will be bhe with a deeper bhe inner cone.
Ifthe burner flame is yellow or is noisy, the air/gas mixture may be incorrect. Contact
a service technician to adjust. (Adjustments are not covered by the warranty.)
With LP gas, some yellow tips on the flames are acceptable. This is normal and
adjustment is not necessary.
• With some types of gas, you may hear a "popping" sound when the surface burner
is turned off. This is a normal operating sound of the burner.
• To improve cooking efficiency and to prevent possible damage to the range or pan,
the flame must be adjusted so it does not extend beyond the edge of the pan.
222

Publicidad

loading

Este manual también es adecuado para:

Jgc8645