JENN-AIR JGC8430 Guia Del Usuario página 7

CA UTION$:
- Be sureappm anceoff andamm
parts are coo[ before handming or
cleaning. This is to avoid dam°
age and possibmeburns.
° To prevent
sr_aimng or
discolorauon
clean appliance after each use,
° [f a part is removed, be sure it is
correctly replaced
BURNER HEADS
• The surface burner headsare removable.
The cap portion of the head is porcelain
and the port area is aluminum. Wash the
burner headsin the sink with mild deter-
gent and a plastic scrubber.
° Check to be sure all ports are open. To
open clogged ports, insert a straight pin
directly into each port. Do not enlarge or
distort the port.
• When replacing the burner heads, care-
fully align the tab on the burner basewith
the indentation in the head. The two pins
will fit in the slots when the tab is aligned
with the in-
dentation.
BU..E..EAO
NOTE:When .... _"
burner heads .... _ '__'_'_ .........
are removed _'_'"'_
for cleaning, _ ,_.,
donot spillliquids __
throughthe holesin *o_
the burner base.
BURNER BASE
BURNER GRATES
• Wash with warm, soapy water and a non-
abrasive, plastic, scrubbing pad or in the
dishwasher. For stubborn soils, clean with
a soap-filled, nonabrasive, plastic pad or
Cool<top Cleaning Creme (Part No.
20000001)** and a sponge.
• The grates are made of porcelain on cast
iron and are very durable, however, they
will gradually lose their shine and/or dis-
color. This is due to exposure to high
temperatures from the gas flame.
CONTROL KNOBS
• Remove knobs in the OFF position by
• Wash, rinse and dry. Do not use abrasive
cleaning agents as they may scratch the
finish.
° Turn on each burner to be surethe knobs
have been correctly replaced.
COOKTOP-PORCELAIN ENAMEL
Porcelain enamel is glass fused on metal and
may crack or chip with misuse. [t is acid
resistant, not acid proof. All spillovers, espe-
cially acidic or sugary spillovers, should be
wiped up immediately with a dry cloth.
• When cool, wash with soapy water, rinse
and dry.
• Never wipe offa warm or hot surface with
a damp cloth. This may cause cracking or
° Never use oven cleaners, abrasive or caus-
tic cleaning agents on exterior finish of
range.
COOKTOP - STAINLESS STEEL
(SELECT :_,ODELS}
" DO NOTUSEANYCLEANING
PROD-
UCT
CONTAINING CHLORINE
BLEACH.
• ALWAYS WIPE WITH THE GRAtN
WHEN CLEANING.
• Daily Cleaning/Light Soil _Wipe with
one of the following -
soapy water,
white
vinegar/water
solution, Formula409 @ass
and Surface
Cleaner* or
a similar muki-
surface cleaner - using a sponge or soft
cloth. Rinse and dry. To polish and hdp
prevent fingerprints, follow with Stainless
Steel Magic Spray {Jenn-Air Model A9[ 2,
Part No. 20000008)**.
• Moderate/Hea W Soil -- Wipe with
one of the following - Bon Ami*, Smart
Cleanser*, or
Soft Scrub* - using a damp
spongeor soft cloth. Rinse and dry. Stub-
born soils may be removed with a damp
Scotch-Brite* pad; rub evenly with the
grain. Rinse and dry. To restore luster and
remove streaks,follow with StainlessSteel
Magic Spray.
Discoloration--
Using a damp spongeor
soft cloth, wipe with Cameo StainlessSteel
Cleaner*. Rinse immediately and dry. To
remove streaks and restore luster, follow
with StainlessSteel MagicSpray.
SURFACE BURNER FALLS TO LIGHT.
° Check to be sure plug is securely inserted
into receptacle.
• Check or re-set circuit breaker. Check or
replace fuse.
• Check power supply.
• Check to be sure burner is correctly rated
for your kind of gas.
° Check to be sure burner ports or ignition
ports are not clogged.
° Check to be sure ignitor is dry and clicking.
Burner will not light if ignitor is damaged,
soiled or wet. If ignitor doesn't click, turn
control knob OFF.
" Check to be sure burner head is correctly
seated on the burner base.
SURFACE BURNER FLAME LIFTS
OFF PORTS.
• Check to be sure a pan is sitting on the grate
above.
° Contact an authorized Jenn-Air servicer.
THE
FLAME IS UNEVEN.
• Burner ports may be clogged.
• Flame may need to be adjusted. Contact an
authorized Jenn-Air servicer.
SURFACE BURNER FLAME IS
YELLOW IN COLOR.
• Contact an authorized Jenn-Air servicer.
• Some yellow tips on the flame are accept-
able when using LP gas.
* Brand names for cleaningproducts are registered trademarks of the respective manufacturers.
** To order direct, ca[[ [-800-688-8408. 6