Publicidad
Idiomas disponibles
Idiomas disponibles
pairing again.
"General" working mode allows the user to pair with keypad and
multi-key callers.
"Single B" working mode allows the user to pair any key from one
multi-key caller with the watch pager. This function allows each key
from one multi-key caller to call a specific watch receiver if needed,
the key names received on the watch are the same.
"Choose R" working mode allows the user to set the watch to receive
calls from the specific keys from one multi-key caller. And the user
can set desired key names for the specific keys following the "Key
Set" instruction.
1.In the standby state, press and hold (about 1s) "A " button to enter setting
mode
2.Press the "A" or "B" button to select "Key Set"
3.Press and hold (about 1s) "A" button to enter sub-menu, it shows the key
name, serial number and selection box
4.Press the "A" or "B" button to select the desired value
5.Press the corresponding key from call button that need to defined the key
name, the serial number will become the key value at the same time, the
key set it completed.
If the user use Watch Pager Software to set the custom key name, press
"A" and "B" buttons at the same time to switch between the custom and the
default key name.
6.In the "Choose R" working mode, press and hold (about 1s) "A" button to
select or cancel the selection
7.Press and hold (about 1s) "B" button twice to exit the setting mode
09
Publicidad
