Retekess TD112 Manual Del Usuario página 6

to the Keypad ID. This pairing operation is completed.
9.Press and hold (about 1s) "B" button twice to exit the setting mode
Evaluator pairing (Combine with TD034 to select this
mode)
Follow the 3 steps above instructions
1.Press the "A" or "B" button to select "Evaluator"
2.Press and hold (about 1s) "A" button to enter sub-menu, it shows the ID
number and ID status. (e.g: Pair NO 0001)
3.Press "B" button to move the edit position
4.Press "A" button to select the desired value (the value could be selected
from 0-9, and A-Z), Press and hold (about 1s) "A" button can delete the
current paired ID.
5.Press the call button that needs to be paired, the watch pager will vibrates
and the status will be changed from "NO" to "OK" . This pairing operation is
completed. It will automatically go to the next ID for pairing new call button.
6.Press and hold (about 1s) "B" button to return back to the setting menu
after pairing all call buttons
NOTE:
A watch pager can pair up to 500 call buttons
Delete Received Call Information
When the watch pager received calls, the received call information will be
displayed in a loop (The cycle interval is 5s, and a maximum of 10 calls are
cycled)
1.Press and hold any key can delete all incoming calls and return to
04