Retekess TD112 Manual Del Usuario página 9

shows the vibration status and prompt time. (The time can be set from 1 to
15 seconds)
6.Press "B" button to move the edit position
7.Press "A" button to select the desired value
8.Press and hold (about 1s) "B" button twice to exit the setting mode
Display Time
1.In the standby state, press and hold (about 1s) "A " button to enter setting
mode
2.Press the "A" or "B" button to select "Prompts"
3.Press and hold (about 1s) "A" button to enter sub-menu
4.Press the "A" or "B" button to select "Display T"
5.Press and hold (about 1s) "A" button to enter Display Time Setting, it
shows the display time on the screen. (The time can be set from 00 to 10
minutes, 00 means the calling information will never auto-cleared)
6.Press "B" button to move the edit position
7.Press "A" button to select the desired value
8.Press and hold (about 1s) "B" button twice to exit the setting mode
Note:
The storage time of the call information is the vibration time plus the
display time
Receiv time（Receive only one call within the set
time）
1. In standby mode, press and hold (about 1s) "A" key to enter the setting
mode
2. Press the "A" or "B" key to select "Prompts", press and hold (about 1
second) the "A" key to enter the submenu, and select "Receive Time"
07