Descargar Imprimir esta página

Retekess TD112 Manual Del Usuario página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Follow the 3 steps above instructions
4.Press the "A" or "B" button to select "Ext Pair"
5.Press and hold (about 1s) "A" button to enter sub-menu, it shows the ID
number and ID status. (e.g: Pair NO 0001)
6.Press "B" button to move the edit position
7.Press "A" button to select the desired value (the value could be selected
from 0-9, and A-Z), Press and hold (about 1s) "A" button can delete the
current paired ID.
8.Press the call button that needs to be paired, the watch pager will vibrates
and the status will be changed from "NO" to "OK" . This pairing operation is
completed. It will automatically go to the next ID for pairing new call button.
9.Press and hold (about 1s) "B" button to return back to the setting menu
after pairing all call buttons
Ket Pair (Pairing with Keypad)
Follow the 3 steps above instructions
4 Press the "A" or "B" button to select "Ket Pair"
5.Press and hold (about 1s) "A" button to enter sub-menu, it shows the
Pager ID, Keypad Serial Number and the status.
6.Press "B" button to move the edit position
7.Press "A" button to select the desired value (the value of the Pager ID
could be selected from 001-999, and the Keypad Serial Number could be
selected from 01-50, "FFF" means that the Keypad Serial Number is not
registered and can be paired ), press and hold (about 1s) "A" button can
delete the current paired ID.
8.Press the corresponding Pager ID number on the keypad, the watch
pager will vibrates and shows OK on the display, the "FFF" will be changed
03

Publicidad

loading