Lists And Explanations Of Messages; Notice Messages; Warning Messages - Omron HCG-801 Manual De Instrucciones

LISTS AND EXPLANATIONS OF MESSAGES

Notice Messages

MESSAGE
Analyzing.
Cannot measure.
Please follow the instructions for
use.
Measurement was stopped.
Push START to begin
measurement again.
Copied *1 data into SD.
Erased *2 data.
*1: Number of readings from 0 to 5. The number displayed represents the amount of copied ECG data.
*2: Number of readings from 1 to 300. The number displayed represents the amount of erased ECG data.

Warning Messages

MESSAGE
Formatting SD memory.
DO NOT REMOVE SD
MESSAGES
CAUSE
The ECG data is being analyzed. No action required. Wait until
An ECG wave-pattern could not
be detected.
The measurement was
interrupted or cancelled.
The indicated ECG data has been
copied to an SD memory card.
The indicated ECG data has been
erased.
CAUSE
The SD memory card is being
formatted.
50
CORRECTION
analysis ends.
Check the instructions and repeat
measurement.
Press START to resume the
measurement.
No action required.
Wait until the message disappears.
CORRECTION
Wait until the message disappears.
Do not remove the SD memory card
until formatting has been completed.