WARNING! IMPORTANT SAFETY INS-
TRUCTIONS.
Carefully read and comply with the Warnings
and Instructions that come with the product as
improper use can cause injury to people and
animals and damage to property. KEEP THE
INSTRUCTIONS for future reference and hand
them on to any new users.
This product is meant to be used only for the
purpose for which it was explicitly installed.
Any other use constitutes improper use and,
consequently, is hazardous. The manufacturer
cannot be held liable for any damage as a result
of improper, incorrect or unreasonable use.
GENERAL SAFETY
Thank you for choosing this product. The Firm is
confident that its performance will meet your ope-
rating needs.
This product meets recognized technical standards
and complies with safety provisions when installed
correctly by qualified, expert personnel (professional
installer).
If installed and used correctly, the automated system
will meet operating safety standards. Nonetheless,
it is advisable to observe certain rules of behaviour
so that accidental problems can be avoided:
- Keep adults, children and property out of range of
the automated system, especially while it is moving.
- Do not allow children to play or stand within range
of the automated system.
- Never let children operate or play with gate controls.
Keep the remote control away from children.
- Cleaning and maintenance must not be performed
by unsupervised children.
- Children must be supervised to ensure they do not
play with the device. Do not allow children to play
with the fixed controls. Keep remote controls out
of reach of children.
- Always keep people and objects away from the
gate. NO ONE SHOULD CROSS THE PATH OF THE
MOVING GATE
-The entrance is for vehicles only. Pedestrian must
use separate entrance.
- Do not work near hinges or moving mechanical parts.
- Do not hinder the leaf's movement and do not
attempt to open the door manually unless the ac-
tuator has been released with the relevant release
knob.
- Keep out of range of the motorized door or gate
while they are moving.
- Keep remote controls or other control devices out
of reach of children in order to avoid the automated
system being operated inadvertently.
- The manual release's activation could result in un-
controlled door movements if there are mechanical
faults or loss of balance.
- Use the emergency release when the gate is not
in movement
- When using roller shutter openers: keep an eye
on the roller shutter while it is moving and keep
people away until it has closed completely. Exercise
care when activating the release, if such a device
is fitted, as an open shutter could drop quickly in
the event of wear or breakage.
- The breakage or wear of any mechanical parts of
the door (operated part), such as cables, springs,
2 -
ARES ULTRA BT A 1500 - 1500 V UL
www.BFTGateOpeners.com | (800) 878-7829 | Sales@BFTGateOpeners.com
USER WARNINGS (GB)
supports, hinges, guides..., may generate a hazard.
Have the system checked by qualified, expert per-
sonnel (professional installer) at regular intervals
according to the instructions issued by the installer
or manufacturer of the door.
- When cleaning the outside, always cut off mains
power.
- Keep the photocells' optics and illuminating in-
dicator devices clean. Check that no branches or
shrubs interfere with the safety devices.
- Do not use the automated system if it is in need of
repair. In the event the automated system breaks
down or malfunctions, cut off mains power to the
system; do not attempt to repair or perform any
other work to rectify the fault yourself and instead
call in qualified, expert personnel (professional
installer) to perform the necessary repairs or main-
tenance. To allow access, activate the emergency
release (where fitted).
- If any part of the automated system requires direct
work of any kind that is not contemplated herein,
employ the services of qualified, expert personnel
(professional installer).
- Test the operator on a monthly basis. The gate
must reverse its movement if in contact with a
solid object or stop when an object activates the
contact sensors. After having adjusted the impact
force and stroke, re-test the gate. Errors in the ad-
justment or test of the operator can increase the
risk of injuries or fatalities.
- A record must be made of any installation, main-
tenance and repair work and the relevant docu-
mentation kept and made available to the user on
request.
- Failure to comply with the above may result in
hazardous situations.
SCRAPPING
Materials must be disposed of in accordance
with the regulations in force. Do not throw
away your discarded equipment or used bat-
teries with household waste. You are respon-
sible for taking all your waste electrical and
electronic equipment to a suitable recycling
centre.
Anything that is not explicitly provided for in the
user guide is not allowed. The operator's proper
operation can only be guaranteed if the instruc-
tions given herein are complied with. The Firm
shall not be answerable for damage caused by
failure to comply with the instructions featured
herein.
While we will not alter the product's essential
features, the Firm reserves the right, at any time,
to make those changes deemed opportune to
improve the product from a technical, design or
commercial point of view, and will not be required
to update this publication accordingly.