Efapel 21236 Manual Del Usuario página 38

Desired
temperature
2.4 Temperature Limits (setting minimum and maximum)
Press
temperatures). Press OK to select or
2.4.1 Minimum Temperature setting
Press
Press OK to confirm and exit. (Default setting: 9,0 °C).
2.4.2 Maximum Temperature setting
Press
Press OK to confirm and exit. (Default setting: 29,0 °C).
38
to navigate through the options (Minimum or Maximum
or to select minimum desired temperature (8,0 °C to 33,5 °C).
Note: The thermostat does not allow the minimum temperature
to be set higher than the maximum temperature, or lower than
the Antifreezing temperature setting (see 2.6). This setting also
serves as a limit to protect against the floor getting too cold (which
is measured via the Floor Probe), so that the floor temperature
does not go below
or to select maximum desired temperature (9,5 °C to 35,0 °C).
to go back.
the minimum temperature limits set.