Contest VERSATILE COLOR VH20-90 Manual Del Usuario página 17

VH2O-90 - IP66 color water effect architectural projector
4 - Attaching the bracket and aiming the projector
Ø13
The projector can be fixed to a suitable flat surface using three attachment points A C C. Notch B locks the projector in Pan rotation through
180°, depending on the position of the locking screw.
Temporary attachment is possible using two clamps fixed through the external holes A.
To choose the tilt angle of your projector: loosen the central screw using a 6mm Allen key and
rotate the projector. The notched clamping part allows the projector to be positioned permanently
and the marking of the angles provides information on the direction of the beam (see figure
opposite).
5 - Lens replacement and adjustment
C
80
1 - Release the knob
2 - Remove lens
A
B
160
284
3 - Insert one of the supplied lenses
4 - Adjust the sharpness of the projection by adjusting the depth
5 - Tighten the knob to ensure a perfect seal and hold the lens in place
English
180°
C
Page 17