Contest VERSATILE COLOR VH20-90 Manual Del Usuario página 20

English
6.6 - Power supply booster :
To overcome the lack of power of the line or the voltage drop due to a long cable length, it is necessary to be able to boost the power supply.
To do this, you will need to use a junction box and separate the DMX coming out of the hybrid cable at the end of the line and isolate the power
supply. A new mains power supply can then be injected into one or more chains of projectors on hybrid connectors at the outlet of the box as
shown in the figure below.
architectural-lighting.eu
IN
Booster power IN
16 A (3500W max)
CAUTION !
The sum of the powers of the different lines must
not exceed the power of the Power input (3500W).
The power per line is limited to the characteristics
of each of the devices, see table in the section on
chaining of projectors.
Hybrid
Power +
DMX IN
(Line output)
Booster
power IN
Page 20
OUT
L
N
D+
GND
D-
1x IpBox-p6 box
1x VC-Start/3 cable
3x VC-End1/3 cable
1x FastCon-1333POW
1x FastCon-1333DMX
L
N
D+
GND
D-
IP plug
VH2O-90 - IP66 color water effect architectural projector
IN
IN
3 x Hybrid
Power + DMX OUT
architectural-lighting.eu
IN
OUT
CAUTION !
Outgoing power supply
OUT to be isolated from the
Booster power supply IN
OUT