Craftsman 172.11624 Manual Del Propietário página 11

CHANGING THEBASES (SeeFigs.5,6)
Ifyourjobrequires u sing the
Detail Finger Base, followthese simple steps for
removingthe attached base.
1. Unplug the sander.
I
/I_WAHNINL_: Failure to unplug the sander could result in accidental I
starting causing possible serious personar injury,
I
2. Remove the 5 Phillips iz
head screws holding the Fig. 5
\
Triangular Base.
3. Lift Triangular Base off of sander.
4. Place Detail Finger Base
onto sander and line up holes
in base with holes in sander
5. Re-insert the 5 screws
and tighten securely.
Fig. 6
Delail Finger
Base
ROCKER SWITCH (See Fig. 7)
To turn the sander "ON",
simply push the rocker switch.
To turn the sander "OFF",
push the rocker switch again.
Fig. 7
On/Off
Switch
11