Craftsman 172.11624 Manual Del Propietário página 6

ADDITIONAL RULES FORSAFE
OPERATION
I Z_WARNING:
BE SURE to read and understand all instructions. I
Failure to follow all Instructions listed below may result In
I
electric shock, fire and/or serious personal injury.
1. Know your power tool. Read operator's manual carefully. Learn the
applications and limitations, as well as the specific potential hazards
related to this tool. Followingthis rule will reduce the risk of electricshock,
fire or serious injury.
2. ALWAYS wear safety glasses or eye shields when using this sander.
Everyday eyeglasses have only impact-resistant lenses; they are NOT
safety glasses. Followingthis rule will reduce the risk of serious personal
injury.
3. ALWAYS protect your lungs. Wear a face mask or dust mask if the
operation is dusty. Followingthis rule will reduce the risk of serious
personal injury.
4. ALWAYS protect your hearing.Wear hearing protection during extended
periods of operation. Followingthis rule will reducethe risk of serious
personal injury.
5. ALWAYS Inspect the tool cords periodically and If damaged have them
repaired at your nearest Sears Service Center or other qualified Service
Facility. ALWAYS be aware of the cord location. Followingthis rule will
reduce the risk of electric shock or fire.
6. ALWAYS check for damaged parts. Before further use of the tool, a
guard or other part that is damaged should be carefully checked to
determine If it will operate properly and perform its intended function.
Check for mlsalignment or binding of moving parts, breakage of parts,
and any other condition that may affect the tool's operation. A guard
or other part that is damaged, should be properly repaired or replaced
at an qualified Service Center. Followingthis rule will reduce the risk of
electric shock, fire or serious injury,
7. DO NOT abuse the cord. NEVER use the cord to carry the tools or pull
the plug from the outlet. Keep cord away from heat, oil, sharp edges or
moving parts. Replace damaged cords immediately. Damaged cords
increase the risk of electricshock. Following this rule will reduce the risk of
electric shock or fire.
6