Craftsman 172.11624 Manual Del Propietário página 15

EXTENSION CORDS
Theuseofany
extension cord willcause some loss of power.To keep the loss
at a minimum and to preventoverheating, use an extension cord that is heavy
enough to carry the current that the tool willdraw.
A wire gauge (AWG) of at least 16 is recommended for an extensioncord
100 feet or less in length. When working outdoors ALWAYS use an extension
cord that is suitable for outdoor use, The cord'sjacket will be marked WA.
replace it immediately.NEVER use a tool with a damaged cord because
touching the damaged area could cause electrical shock, resulting in
serious injury.
Extension cords that are suitablefor use with your sander are available at your
nearest Sears Store.
The following recommended accessories are currently available at your local
Sears Store. They are available for both the triangular base and the detail
finger base,
Medium (120) Grit Sandpaper for paint, varnish, rust removal
and light stock removal
Fine (180) Grit Sandpaper for surface blending and sanding
Extra Fine (220) Grit Sandpaper for sanding between paint coats and
finish sanding
Detail SandingTips for use in corners and hard-to-reach areas
Light Gray Polishing / Stripping Pad for polishing metal, stripping varnish
and urethane
Dark Gray Fine Polishing Pad for fine polishing to a satin finish on paint,
metal, varnish and urethane
Gray Foam Pad for applying and removing polish
White Non-Woven Pad for light-duty scrubbing
Red Non-Woven Pad for heavy-duty scrubbing / rust removal
Z_WARNING:
The use of attachments or accessories that are not J
recommended might be dangerous.
I
15