Trim Rail High
Description:
UH125/200K7
Fit:
Nr.
Description
Part List
A.
Trim Rail High
1.
4.8x32 Cross Head Screw
2.
Spacer 12x6.5x12
3.
Rubber cap
Nr.
Description
Tools
Requiered
I.
Screw Driver PH3
Read this instruction manual carefully. Special
Important
information is described with the symbol
or the words WARNING, IMPORTANT and
!
REMARK. Take care to these points.
WARNING
IMPORTANT
REMARK: Contains special informations to
REMARK
fit the parts easily
If you do not feel technical qualified to install this product on your own, please consult with your nearest
SUZUKI dealer.
1. Park the motorcycle on a firm and even surface
Preparation
2. Turn off the motorcycle and remove the ignition key. If necessary, allow the
engine/exhaust to cool prior to installation.
3. Read this instructions before the assembly carefully and examine whether all
parts are enclosed in accordance with the parts list.
4. In order to avoid a loosening of the screws by vibration, we recommend
securing the threads with liquid thread-locker.
2
INSTRUCTION
Qty.
2
2
2
4
I.
Shows risks for your life and health.
!
Shows risks which can damage your
bike.
IMPORTANT
990D0-03H00-041
Item:
10 Min.
Assembly time:
A
1
2
3
!
WARNING
IMPORTANT
1. Remove rubber mat and original
Mounting
screws
1
2
2. Install the rubber caps (3) at the
Trim High (A).
3. Install the Trim High at the vehicle as
shown on the instruction drawing, using
screw (1), spacer (2) and the original
screws (X). Install the original rubber
mat.
4. The same mounting procedures are
both on the left- and on the right side
of the vehicle to accomplish.
1. Please make sure that all screws are
Inspection
firmly tightened and seated properly.
IMPORTANT
Attachments can loosen from vibrations. Examine the
screw thightness in regular intervals in agreement with
the service manual.
Chrome parts requires a lot of care. To keep your chrome
parts looking good for a long time to come, we recommend
regular care with a commercially available chrome
cleaner.
SUZUKI GENUINE ACCESSOIRIES
3
4
5
6 7 8
Stand of tecnic 08/2007