Kohler K-3396 Guia De Instalacion página 6

13-1/2"
(34.3 cm)
16-1/2" (41.9 cm)
7/8" (2.2 cm)
5/8" (1.6 cm)
Minimum clearance
between wall and
control box
1-1/2" Outlet
2. Preparation
Install the rough drain piping according to the roughing-in
information.
This unit can be installed into a cabinet with a width of 18" (45.7
cm) or more. The actual installation width is 16-1/2" (41.9 cm). A
minimum clearance of 5/8" (1.6 cm) is required between the
cabinet wall and the side of the control box. If using a small
cabinet, position the template carefully in order to avoid
interference between the product and the cabinet.
Ensure that the desired sink location has adequate clearance to
the backsplash, faucet, sink, and cabinet.
NOTE: The marks made in tracing the template may be hidden by
the cook sink mounting ring. Use care if using an indelible marker.
Use the supplied template (1031440-7) to mark the location for the
two cutouts on the cabinet.
Drill starter holes for the saw in each of the cutouts.
Use a saber saw or equivalent to cut out the holes for the cook
sink and control.
1032055-2-B
7-1/2"
(19.1 cm)
15" D.
(38.1 cm)
3/4" (2 cm)
5/16" (8 mm)
21"
(53.3 cm)
6 Kohler Co.