Make sure that the power cable is undamaged and has not been installed under the
device or over hot or sharp surfaces.
The electrical outlet must be protected by a 16A safety cut-out switch, separately from
other electricity consumers.
The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. If in doubt, have the house installation
checked over by a qualified electrician. The manufacturer cannot be made responsible
for damages that are caused by a missing or damaged protective conductor.
12 Design and Function
This chapter provides you with important safety notices on the design and function of the
device.
12.1 Complete overview
(1) Protective door latch
(4) Device ventilation opening (5) Operating panel / rotary knob 6) LED-strip
► The
base plate!
► The ventilator can continue running afterwards to cool down the device.
► Do not use the device, when it is empty. It could be damaged.
(2) Device window (3)
ATTENTION
base plate can be hot following the cooking time. Do not touch the
PLEASE NOTE
base plate
47