Publicidad
Idiomas disponibles
Idiomas disponibles
PLEASE NOTE! Drawings in this manual are for illustration purposes only and in some details may
differ from the actual product.
2. Usage safety
ATTENTION!
Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury or even death.
The terms "device" or "product" are used in the warnings and instructions to refer to:
Infrared heating panel with built-in remote Wi-Fi thermostat
2.1.
Electrical safety
a)
The plug must fit the socket. Do not modify the plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b)
Avoid touching earthed elements such as pipes, heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed device is exposed to rain, comes into direct contact with
a wet surface or is operating in a damp environment. Water getting into the device increases the risk
of damage to the device and of electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Use the cable only for its designated use. Never use it to carry the device or to pull the plug out of a
socket. Keep the cable away from heat sources, oil, sharp edges or moving parts. Damaged or tangled
cables increase the risk of electric shock.
e)
If using the device in a damp environment cannot be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of electric shock.
f)
Do not use the device if the power cord is damaged or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or the manufacturer's service centre.
g)
To avoid electric shock, do not immerse the cord, plug or device in water or other liquids. Do not use
the device on wet surfaces.
h)
ATTENTION! DANGER TO LIFE! While cleaning, never immerse the device in water or other liquids.
i)
Do not use in very humid environments or in the direct vicinity of water tanks.
j)
Before the first use, please check whether the main voltage type and current comply with the
indicated data on the type plate.
k)
The device will draw more current than small devices, so a separate 10A socket is required.
l)
Do not use the device when the socket or cord is overloaded.
m) Turn off the device and disconnect the power cord from the power outlet when the device is not in
use.
n)
Do not use this device near bathtubs, paddling pools, swimming pools or other containers with water.
Risk of electric shock!
o)
The device should be placed in a place where switches and regulators cannot be touched by a person
in the bath or shower.
2.2.
Safety in the workplace
a) Make sure the workplace is clean and well lit. A messy or poorly lit workplace may lead to accidents.
Try to think ahead, observe what is going on and use common sense when working with the device.
b) Do not use the device in a potentially explosive environment, for example in the presence of flammable
liquids, gases or dust.
c)
If you are unsure about whether the product is operating correctly or if you find damage, please
contact the manufacturer's service centre.
d) Only the manufacturer's service centre may make repairs to the product. Do not attempt to make
repairs yourself!
e) In case of fire, use a powder or carbon dioxide (CO2) fire extinguisher (one intended for use on live
electrical devices) to put it out.
f)
Please keep this manual available for future reference. If this device is passed on to a third party, the
manual must be passed on with it.
g) Keep packaging elements and small assembly parts in a place not available to children.
EN
Publicidad
