Publicidad
Idiomas disponibles
Idiomas disponibles
4. Press the "+" and "－" key at the same time to switch the temperature unit between °C and °F.
5. Press the "
" key and the "－" key at the same time for 3 seconds to open the child lock mode, do
so again to close.
6. SET means the target temperature. Heating symbol:
1) If the SET temperature is lower than the ROOM temperature, the heating symbol is not displayed.
2) If the SET temperature is higher than the ROOM temperature, the heating symbol is displayed.
3) When the room is heated to the SET temperature, then the remote control will stop displaying
the heating symbol.
4) Every time you press the button, the screen background will light up, and it will be off if no
operation within 5 seconds.
3.3.3. Wi-Fi connection
1. Scan and install below Smart Life APP, and Register an account.
2. Long press Wi-Fi reset button 5-10s or repeat powering on/off the heater 4 times by plug until the
front corner red indicator light blinks.
NOTE: same operation is necessary when Wi-Fi hotspot changed, Wi-Fi password changed, or cell
phone changed.
1 – Corner indicator light – Red color means online; Blue color means heater powering on
3. Click Smart Life App to enter main interface, select room name and click "Add Device" or the upper
right corner "
" icon. A pop-up window appears as below picture.
EN
Publicidad
