UNIPRODO UNI IHP 01 Manual De Instrucciones página 24

Internal receiver technical data:
Power Supply: AC220-240V
•
• Wireless standard: IEEE802.11b/g/n
Frequency range: 2.412~2.484GHz
•
• Security mechanism: WEP/WPA-PSK/WPA2-PSK
• Encryption type: WEP/TKIP/AES
Standby power consumption: <0.8W
•
• Working environment: temperature -5 ~ 50 ° C; humidity 10% -95%.
3.3.2. Remote controller
1. Built in receiver and remote controller constitute the temperature control system.
2. The remote controller is powered by 2pcs of 1.5V AAA battery. Please change with new batteries if the
battery symbol gets flashing, or else the remote will not be able to control the heaters.
3. The remote controller acquires the room temperature through the senor on the top and send real-
time temperature data to the receiver.
4. The screen can display the room temperature, setting temperature, child lock, battery level etc.
5. The remote controller has the functions of switching heater on/off, setting temperature, temperature
conversion, child lock etc.
6. When the screen of the remote-controller is off, it only means that the heater is off, and it does not
mean that the remote-controller has stopped working. It is still detecting real-time temperature data
and sending the real-time temperature data to the receiver every 60s for logical control (the remote
controller will send the collected temperature data whether it is on or off).
7. One remote controller can be paired with several heaters, users can pair them one by one or at same
time together, both ways are workable.
EN