UNIPRODO UNI IHP 01 Manual De Instrucciones página 23

5. Slid the device to make the screws into the correct positions as shown in below drawing.
6. Plug in to start using the heating device.
7. Pull out the plug when not in use.
3.3. Device use
3.3.1. Internal Receiver
The receiver is located at the rear of the unit.
EN
1 – Internal Receiver
1 – Wi-Fi reset button (long press for 5-10 seconds
for reset)
2 – Thermostat disable switch – ON means
disabling thermostat