Ego Power+ PU2700 Manual De Instrucciones página 9

UPGRADING PU2700 INTO PU2700S
1. Loosen and remove the seven screws securing the
top cover, then open the battery compartment cover
to remove the top cover (Fig. G1 & G2).
Screws
G1-1 securing the top G2-1
cover
G2-2 Top cover
2. Loosen and remove the three screws securing the
shield cover, then remove the shield cover (Fig. G3).
Screws securing the
G3-1
Shield cover
3. Remove the black heat-shrink tube covered on the
connector (Fig. G3)
G3-3 Connector
4. Mount the BAX1500 battery socket onto the power
unit and connect the socket cable with the connector
of the power unit. Place the cables into corresponding
slots, and then fix the BAX1500 battery socket by
tightening the three screws. The recommended
tightening torque is 1.5-1.8 Nm. (Fig. G4)
G4-1 BAX1500 battery socket/ ABS2700 (optional)
5. Reassemble the top cover onto the power unit by
tightening the seven screws. The recommended
tightening torque is 1.5-1.8 Nm. (Fig. G5)
Battery compartment
cover
G3-2 Shield cover
TRANSPORTING/STORAGE
TRANSPORTING THE POWER UNIT
CAUTION:
In case of damaging the power unit,
please never let the PTO shaft be impacted or let force
push in the PTO shaft (Fig. H).
STORING THE POWER UNIT
◾
Remove the battery packs from the power unit.
◾
Clean the power unit thoroughly before storing.
◾
Store the power unit in a dry, well-ventilated area, out of
the reach of the children. Do not store the power unit on or
adjacent to fertilizers, gasoline, or other chemicals.
PROTECTING THE ENVIRONMENT
Do not dispose of electrical
equipment, used battery and charger
into household waste! Take this
product to an authorized recycler and
make it available for separate
collection. Electric tools must be
returned to an environmentally
compatible recycling facility.
UNIVERSAL POWER UNIT-PU2700/PU2700S
EN
9