ADE CK 2303 Instrucciones De Operación página 32

− Hold the "-" button to start signal reception (and
do the same again to stop signal reception).
Pay attention to the following:
‚ If the reception was not successful, the reception
symbol fades out after a few minutes and the
time on the display continues normally.
‚ If the clock receives a signal successfully, it
adjusts itself to the time of the time signal
transmitter. If you have already made manual
time and date settings, they will be adjusted
automatically.
Choosing a location
NOTE on material damage
‚ Maintain a distance from TV sets, computers and
monitors. Base stations of cordless telephones
should also not be in the immediate vicinity of
the radio-controlled clock.
‚ Depending on the location, it may occur in rare
individual cases that the clock receives signals
from another time signal transmitter or even
alternately from two time signal transmitters.
This is not a fault in the device. In this case,
change the location of the clock.
‚ The weather, e.g. a heavy storm, can cause
interference with the reception.
‚ Temporary shutoffs of the transmitter can
sometimes happen, e.g. because of maintenance
work.
32
‚ Protect the clock from dust, shocks,
extreme temperatures, direct
sunlight and moisture. Only place it
in a dry, closed room.
CK 2303 DCF radio-controlled alarm clock