ADE CK 2303 Instrucciones De Operación página 36

Interrupting the alarm for 24 hours
− Press any button to interrupt the alarm (do not
press the sensor field). After 24 hours, the alarm
will be triggered again.
− Watch the display: when the bell symbol stops
flashing, the alarm has been interrupted for
24 hours.
Repeat alarm (snooze function)
− When the alarm sounds, briefly press
on top of the clock.
Indications
The device will switch on again according to the
selected setting (the default setting is 5 minutes) to
wake you up again. This procedure can be repeated
multiple times.
Other functions
Showing and hiding the date display
− Briefly pressing SET shows and hides the date in
the lower display line.
Illuminating the display
− Pressing the sensor field
enables the display backlight for approx.
10 seconds.
Change temperature unit
− Press the °C/°F button to toggle the display
between degrees Celsius and degrees
Fahrenheit.
36
(or ) and
CK 2303 DCF radio-controlled alarm clock
flash on the display.
above once
once