Craftsman 139.53939D Manual Del Propietário página 36

Smart ControlPanel®Messages
The following messagesare contained within the Smart Control Panel _ and may appear during the operations of the unit:
Safety Sensorscheckalignment,
blockageor miswiring see
owner's manual
Safety Sensorsmalfunctioncheck
miswiring see owner's manual
Learn remote controlpress LEARN
buttonto confirm
Learn mode press remote control
buttonto program remote
Lock mode remote controllocked
out press LOCKbuttonto enable
remote
English, Frangaisand Espafiol
Motion Sensing ON
Motion Sensing OFF
........................ •
Battery backupenabled
........................ •
Battery backupenabled
........................ •
Battery low
Battery backupenabled
Meaning: Thismessage will appear if the Safety ReversingSensorsare out of
alignment, if they are blockedor if the wiringis disconnected.To clear message from
door control do the following:
• Checkto see that area is clear between the Safety Reversing Sensors.
• Checkto see that the Safety Reversing Sensors are not misaligned.
• Realign receiving eye sensor, clean lens and secure brackets.
• Verify door track is firmly secured to wall and does not move.
• Checkto see that the Safety Reversing Sensors' wires are connected to the motor unit.
• If message has not cleared after the above checks, refer to message#2.
Meaning: Thismessage will appear if the Safety ReversingSensorsare miswired.
To clear the message, do the following:
• Inspect the safety reversing sensor wires for a short (staple in wire), correct wiring
polarity (black/white wires reversed), replace/attachas needed.
• Disconnect all wires from back of motor unit.
• Removesafety reversing sensors from brackets and shorten sensor wires to 1-2 ft.
(30-60 cm) from back of each sensor.
• Reattachsending eye to motor unit using shortened wires. If sending eye indicator light
glows steadily, attach the receiving eye.
• Align sensors, if the indicator lights glow replacethe wires for the sensors. If the sensor
indicator lights do not light, replacethe safety reversing sensors.
Meaning: Thismessage will appear when the *LEARN' b uttonhas been pressed on the
door control Pressingthe *LEARN' b uttonagain will allow the user to program an
additional remote controlto the opener.
Meaning: Thismessage will appear when the *LEARN' b uttonhas been pressed a
secondtime on the door control or anytime on the opener. The opener is ready to
programanother remote controlby simply pressingthe remote controlbutton. Once
the opener has *LEARNED' the remote control, the work/ightwill blink one time.
Meaning: Thismessage will appear when the *LOCK' b uttonhas been pressedand held
for more than one second. Thisfeature will disable the opener from receivingremote
controlsignals. To exit *LOCK' m ode, press and hold the button for more than one
second.
Meaning: Thismessage will appear when the *LANGUAGE' button has been pressed.
Pressing the button will toggle to the nextlanguage.
Meaning: Thismessage will appear when the Motion Sensingbuttonis pressed.
The motion detector will toggle on or off with eachpress of the button.
Meaning: Openeris runningon battery power.
Meaning: Openeris runningon battery power with full charge.
Meaning: Openeris runningon battery power with low charge.
........................ • Meaning: Battery is beyonda recoverablecondition.
Battery bad replace battery now
see owner's manual
4) Meaning: Battery chargingfrom recent battery backupstate.
Power restoredbattery charging
36