Publicidad
Idiomas disponibles
Idiomas disponibles
4. When installing the chain, the locking clip must be on the outside of the vehicle, and the opening end is opposite to the
running direction of the chain to prevent the locking clip from being thrown out by the centrifugal force generated by the
high-speed running lock of the chain.
5. Clean the chain and gear plate regularly, and add grease in time. If there are rain, snow and muddy roads, the
maintenance of the chain and gear plate should be strengthened.
Notice:
Before each ride, check whether the transmission system is working properly. If you notice any defect or
damage, you must check and repair it immediately, and replace the parts of the transmission system if
necessary, and the parts can only be obtained from a qualified dealer. Your dealer can recognize any
signs of wear and can replace parts that are needed if necessary. Therefore, if necessary, bring the
vehicle to the dealer for testing.
.IX. Inspection and adjustment of the front brake
Fig.22 inspection front brake
[Check] (Picture 22)
●Measure the free stroke of the front brake handle: 5～10mm.
●Measure the thickness of the front brake disc and brake friction
lining.
●Check the oil level in the oil cup; check whether the brake caliper is
normal; check the brake oil pipe and there is no oil leakage or cracks
in the brake oil cup; check the wear of the brake disc.
55
Publicidad
