Publicidad
Idiomas disponibles
Idiomas disponibles
9. Built-in printer (optional)
In order to enable the printing function press
key. Measured values
will be printed each 15 seconds, and the Dielectric Absorption Index and
Polarization Index will be printed after 1 minute and 10 minutes
respectively. Printing may be started or stopped at any time during the
test. However, it is convenient to turn the printer on before starting the
test in order to print it complete, including the heading.
Paper feed
The blue key located in the left upper part of the printer body, is the Paper
feed control. Press this key 3 times after the test is finished and before
cutting the paper, in order to visualize the last lines.
This printer uses 37 mm wide thermal paper, which comes in a 33 mm
diameter reel. The figure shown above indicates how to put the paper.
Press the Paper feed control until the paper appears. To remove the old
paper reel, cut the paper next to it and press the Paper feed control. The
removal used-reel operation must be carried out in this way due to the
fact that the paper movement is in one-way only, that is, the paper can be
moved in one direction only.
ATTENTION: Don't pull the paper, always use the Paper feed key. Never try to put
the paper back into the printer. In any of these cases, the printer can be easily
damaged.
23
Publicidad
