Malossi Injtronic Manual Del Usuario página 12

TPS calibration can be considered
complete and the vehicle is ready to
be started. If the vehicle does not start,
repeat the entire procedure, making
sure that each step is carried out as
per instructions.
ATTENTION
Before using the vehicle, please
follow the hereunder steps with cold
engine
• switch on the vehicle and keep it at
idle speed for 15 minutes, don't touch
the GAS control at all
• switch off the vehicle
• change quickly the OFF/ON key over
for 5 times
• once the key is turned on OFF for the
last time, wait for 15/20 seconds and
switch the vehicle ON.
In case the idle speed is uneven,
please repeat the above
mentioned operations.
12