Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting the water hoses
NOTE: The water supply hoses are not supplied with your washer and
must be purchased separately.
Caution
•
Use new water supply hoses. Using old hoses can result in leakage
or overflow that can damage your property.
•
Do not connect multiple water supply hoses together to increase
the length of the hose. Hoses connected this way can leak and
cause electrical shock. If a hose is too short, replace the hose with a
longer, high-pressure hose.
1. Make sure that there are rubber washers inside the fittings at both
ends of each new water hose. Remove the rubber washers in faucet
side and replace with filters. Installing the water supply hoses
without rubber washers can cause water leakage.
2. Tighten the hose and faucet fittings by hand until they are snug,
then tighten them an additional two-thirds of a turn with pliers or a
wrench. Pull the water supply hoses downwards to make sure that
they are connected securely.
19
Publicidad
