Publicidad
Idiomas disponibles
Idiomas disponibles
6. Connect your device to wireless network according to the instructions on
app, if the connection fails, please follow the instructions provided by the
app to continue with the operation.
7. Start the remote control
Press smart control button once on the washer, then the machine will enter
the remote control state and you can start the machine remotely, which means
it has entered the remote control state and you can start to control remotely.
WiFi Status Light
Note!
•
Make sure your devices are powered on.
•
Keep your mobile phone close enough to your device when you are connecting
network to your device.
•
Connect your mobile phone to the wireless network at home, and make sure you
know the password of the
•
Check if your router supports 2.4 GHz
are not sure whether the router supports 2.4 GHz band, please contact the router
manufacturer.
•
The device cannot connect to the
it usually appears in public area such as hotels, restaurants, etc. Please connect to a
wireless network
•
It is recommended to use a
numbers.
•
If your
router.
•
phone when connecting network to your devices.
•
In the case that your device connected to
reconnect, please click "+" on app Home page, and add your device again by the
category and model according to the instructions on app.
•
Operating Temperature: -20℃~85℃
•
The Max RF Output Power：
36
Frequency band of operation:2400-2483.5MHz
Slowly flashing
Quickly flashing
Light is on
wireless network
that does not require authentication.
wireless network
name contains special characters, please modify it in the
Waiting for connection
Connecting
Connected to your wireless router
.
wireless network
wireless network
wireless network
name that only contains letters and
wireless network
wireless network
: E.I.R.P.: 18dBm， Bluetooth LE: 10dBm.
8: 88
band and turn it on. If you
that requires authentication, and
before but it needs to
Publicidad
