Publicidad
Idiomas disponibles
Idiomas disponibles
A submenu will then appear, as follows:
4) Select the information to be printed.
Once the data has been transferred to the computer, the printing software will display the latest test
result information.
The data can be printed using a computer printer.
3.3.
Cleaning and maintenance
a)
Use only non-corrosive cleaners to clean the surface.
b)
After cleaning the device, all parts should be dried completely before using it again.
c)
Store the unit in a dry, cool place, free from moisture and direct exposure to sunlight.
d)
Do not spray the device with a water jet or submerge it in water.
e)
Do not allow water to get inside the device through vents in the housing of the device.
f)
The device must be regularly inspected to check its technical efficiency and spot any damage.
g)
Use a soft cloth for cleaning.
h)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
i)
Do not clean the device with an acidic substance, agents of medical purposes, thinners, fuel, oils or
other chemical substances because it may damage the device.
DISPOSING OF USED DEVICES:
Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device
recycling and collection point. Check the symbol on the product, instruction manual and packaging. The
plastics used to construct the device can be recycled in accordance with their markings. By choosing to
recycle you are making a significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.
EN
Publicidad
