Elcometer PP10T Manual De Instrucciones página 21

20. Declaration of conformity
Manufacturer:
Address:
Hereby declares that the product: PRESSURE POTS
Brand:
Product line:
CE Conformity declaration
The pressure unit meets requeriments established in Directive 2014/68/CE (Pressure equipment).
These also meets the following Regulations and Directives:
2014/42/CE Machinery Safety Directive
Non electrical equipment:
ATEX Directive (Directive 2014/34/CE)
Protection Level II 2G Suitable for use in Zones 1 and 2
"X" marking All static electricity is discharged through air pipes (the air hoses must be "STATIC FREE"
Is in conformity with the requirements of the following European Standard Directives, and has used the
following technical standards for its construction:
UNE EN ISO 80079-36:2017
UKCA Conformity declaration
Is in conformity with the provisions of the Directive on machines (Directive 2008 No. 1597).
Is in conformity with the requirements of the following British Directives:
Pressure Equipment (Safety) Regulations 2016 No 1105
Non electrical equipment:
ATEX regulation (Directive 2016 No1107) II 2G x
Marked "X" All static electricity is discharged by the air ducts. Air hoses should be "ANTISTATIC" as
well as its modifications and updates, and provisions according to the national legislative code of the
destination country.
Is in conformity with the requirements of the following British Standard Directives, and has used the
following technical standards for its construction:
BS EN 80079-36:2016
"Non electrical equipment used for potentially explosive atmospheres."
Full technical documentation and service instructions are available.
In Vitoria-Gasteiz on 01/09/2022
www.elcometer.com
SAGOLA, S.A.U.
Urartea, 6 • 01010 VITORIA-GASTEIZ (Álava) SPAIN
ELCOMETER
PP10T-MA / PP10TS
PP25T / PP50T
II 2G T4 x
"Non electrical equipment used for potentially explosive atmospheres."
Signed:
Enrique Sánchez Uriondo
Technical Manager
EN 19