Elcometer PP10T Manual De Instrucciones página 6

05. Components
1 Body of the tank
2 Lid
3 Fluid outlet ball valve
4 Manual remover handle
5 Air inlet
6 Pressure regulator (gun)
7 Pressure regulator (pressure pot)
8 Security Valve
9 Clamp
9
8
PP25/50T
06. Warnings
It is advisable to read all the instructions indicated below carefully.
Before putting the unit into operation, and especially after each cleaning and/or repair operation, a
check must be made that the pressure pot components are securely tightened and that the air and/
or product hoses are airtight (no air leaks). Faulty parts must be replaced or repaired as appropriate.
Check that the unit's safety devices work properly before using it.
Ensure that the products to be applied are chemically compatible with the
components these come into contact with (aluminium, stainless steel,
polythene and acetylene resin).
Do not use corrosive or abrasive products.
The unit is easy to handle thanks to its design and the simplicity of its mechanisms. Use it according
to the operating, maintenance and safety instructions indicated in this manual and follow the
application methods indicated to obtain the required finish quality.
EN 04
6
7
5
3
3
2
PP10T-MA
4
9
1
Fig.01
PP10T-MA
www.elcometer.com