Displaying Measurement Results; To Writing Measurement Results To The Memory Stick - Eclipse CD7000 Manual Del Propietário

Displaying measurement results

Press the button [6] for less than
2
one second in PEQ screen.
After pushing the button, a 10-second
countdown begins. Leave the vehicle
during that time.
Pink noise will be output from the
speakers and measurement of the
frequency characteristics will start.
[Measuring] will appear on the display
while measurement is in progress.
When measurement is complete, the
measurement results will appear on
the display. You can adjust the volume
(by turning the [VOL] button) and
restart measurement
measurement is in progress.
Press the button [6] once more to
cancel measurement.
The measurement result can be
referred to when adjusting parametric
equalizer.
Press the [CUSTOM] or [RTN]
3
button to exit sound adjustment
mode.
How to operate the Sound Adjustment Mode
To writing measurement results to
the Memory Stick
2
Insert the Memory Stick.
Press the button [6] for more than
3
one second.
After pushing the button, a 10-second
countdown begins. Leave the vehicle
during that time.
Pink noise will be output from the
speakers and measurement of the
frequency characteristics will start.
[Measuring] will appear on the display
while measurement is in progress.
When measurement is complete, the
while
measurement results will appear on
the display. You can adjust the volume
(by turning the [VOL] button) and
restart
measurement is in progress.
Measurements can be written to a
memory
automatically
website.
Press the button [6] once more to
cancel measurement.
Press the [CUSTOM] or [RTN]
4
button to exit sound adjustment
mode.
ATTENTION
• Sound quality data is written to Memory
Stick as follows.
MSFTEN
measurement while
stick and corrected
using the E-iSERV
DATA
206 000.eis
*
File extension
Three digit number
Adjustment mode
(e: 3 Way, f: 4 Speaker)
XII
71