ENGLISH
Non-removable parts
Powder-dispensing
channel
Brewing base
56
When to clean them
Check it one a week.
Check it one a week.
How to clean them
Method 1:
1. Press and hold down the icons
coffee bean emptying and single
espresso for 2 seconds, their
corresponding indicator lights will
flash.
2. After opening the panel of the coffee
machine (the appliance remains
in the safety protection mode),
the inside of the machine can be
cleaned.
3. Open the panel and loosen the
ground coffee in the powder-
dispensing channel with a toothpick,
then close the panel.
4. Press and hold down the icons
coffee bean emptying and single
espresso for 3 seconds, their
corresponding indicator lights will
turn off and the panel will close.
Method 2:
If there are only a few coffee beans left
in the tank, press, and hold the coffee
bean emptying icon for at least one
second to keep the machine running
until the ground coffee blocked in the
powder-dispensing channel is emptied,
after which the machine will return to
normal operation.
NOTE: if the ground coffee becomes
finer during use, check the powder-
dispensing channel for any dust
blockage. It should be cleaned once a
week.
Clean the coffee residue around the
brewing base with a brush.