Silk’n BRIGHT LUX FAC03 Manual De Usuario página 12

6.2 Switching on/off and selecting an operation mode
1. Press the cleansing button ( )
The facial brush
The cleansing button illuminates white during operation.
2. Press the cleansing button ( ) a second time.
The device is switched to the pulsating mode.
3. Press the cleansing button ( ) a third time.
The device is switched off.
6.3 Selecting a speed setting
• In the selected operation mode (vibrating or pulsating), press
the increase button (+)
select a speed setting (1–7). The default level is 4.
6.4 How to use
1. Dampen your face and the facial brush
water. Apply your regular face wash product on your face (see
step 1 in Fig. B).
2. Switch on the facial brush, select the vibrating mode and a
speed setting (see instructions in the previous chapters).
3. Clean your face by moving the facial brush over the face in
circular movements (see step 2 in Fig. B).
• Use the thicker studs for areas that need precise cleansing (e.g.
around the nose, eyes and chin) and use the thinner studs for
the larger areas (e.g. forehead, cheeks and neck). We recom-
mend cleansing each area for no more than 20 seconds.
• Once the facial brush starts, you hear a beep sound every
30 seconds, hinting to you about the time that has passed. The
device automatically switches off after 2 minutes.
Note that whenever you change the operation mode or speed
setting during the cleansing session, the timer will be reset to
zero.
• If you want to end the cleansing session earlier, press and hold
the cleansing button ( )
4. Thoroughly rinse your face and the facial brush with water and
then wipe them dry with a clean, dry towel (see step 3 in
Fig. B).
5. Apply your serum or day/night cream on your face.
6. Turn on the facial brush and select the pulsating mode and a
speed setting (see instructions in the previous chapters).
3
is switched on in the vibrating mode.
1
or decrease button (–)
2
until the facial brush switches off.
3
once.
with lukewarm
1
EN
to
4
12